Submersible Pressure Transducer 0 To 1.5 Psi

Submersible Pressure Transducer 0 To 1.5 Psi

Part #PTS-0-1-5PSI-01

MFG #PTS-0-1-5PSI-01

Submersible Pressure Transducer 0 To 1.5 Psi

Maretron Fluid Pressure Sensor Transducers work with the Maretron FPM100 which will adapt up to six pressure Transducers to the NMEA 2000 network. Submersible Pressure Transducer - 0 to 1.5 PSI Used for tanks up to 40" or 1M in depth. When used together with Maretron displays, alerts can be set so the user can be informed of low or high tank levels. And when not on-board the vessel, users can be notified through emails or text messages about their tank levels. Additionally, the tank levels can be stored using Maretron's data recorder (VDR100) for later analysis.

Maretron pressure Transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure Transducer that is approved for use with gasoline.

Electrical:

Sensor Type: Gauge (Vent Tube)
Output: 4 – 20 mA current loop, loop powered
Excitation Voltage: 9 VDC to 32 VDC
Compatible Fluids/Gases: Motor Oil, Diesel, Hydraulic Fluid, Water, Waste Water
Operating Temperature: 14°F to 158°F (-10°C to 70°C)
Ambient Temperature: 14°F to 158°F (-10°C to 70°C)
Accuracy: ±0.3% Full Scale typ. at 25°C
Total Error Band (TEB): ±1.0% Full Scale typ. (-10°C to 70°C)
Non-Linearity, Hysteresis (NLH): ±0.2% Full Scale typ. Best Straight Line (BSL) at 25°C
Temperature Compensation Zero Point and Span: 0.04% Full Scale/°F (0.02% Full Scale/°C)
Long Term Stability: 0.2% Full Scale typ. 1 year at 25°C
Rise Time: 1 ms typ. (10%-90% nominal pressure)
Switch-On Delay: 100 ms
Over Pressure: 15 PSI (1.03 bar)
Burst Pressure: 30 PSI (2.07 bar)
Vibration: 6 g (25 to 2000 Hz)
Shock: 50 g / 8 ms
Construction: AISI316L stainless steel housing, pressure connection; Ceramic, Al2O3 (96%) Sensor; FKM (FPM, Viton), EPDM (TPE) seals; PUR cable
Minimum Cable Bend Radius: 1.57” (40 mm)
EMC Compatibility: EN/IEC 61000-6-3 / GL 2012, IV, Part 7 (Emission and Immunity)
Weight: 12.6 oz (357 g)